It is real easy to determine the proper direction of rotation for any blade on woods mowers or any type of a circular saw. You have to turn the bolt or nut in the direction they rotate when cutting to loosen them. If it were any other way, the blades would fall off when you hit something. I recently took a 5 ft woods belly mower off my IHC and it was a right hand discharge with cw rotation. I replaced the 5 ft with a 6 ft woods belly mower and it rotates ccw and is a left hand discharge. BTY, all blades must rotate in the same direction. My rear mount 6 ft woods mower rotates cw and is a left hand discharge. That said, get yourself a 3 inch pipe 2 ft long and 1 inch pipe 2 ft long. I put the 3 inch pipe over the blade and the 2 ft pipe on my 2 ft ratchet. When you hit something with the blade, the bolts are self tightning. You will need all the help you can get to remove the blades. Does anyone need a 5 ft woods belly off a 1950 IH C? George
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
