Re: IMT 542 Tractor

Posted by GEO on June 27, 2001 at 14:22:54 from (63.104.132.181):

In Reply to: IMT 542 Tractor posted by Mike S on June 27, 2001 at 07:31:48:

You should have 80/90 GL-5 fluid or at least 90W GL-1 fluid in the tractor. One of the more simple things to check, is the stand pipe orings. Just unbolt the small rectangular housing just under and to the right of the seat. Lift the stand pipe out and replace both oring on it and reinstall. If this does not help, you will either have a cut relief valve or possibly the control valve will be worn out and need replacing. There are other orings that can blow out in the hydraulic pump as well.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IMT 542 Tractor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]