|
Tractor Talk Discussion Board |
Re: Re: Re: Re: 12 volt 9N.......HELP!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tyler(WA) on March 30, 2001 at 07:57:21 from (12.13.226.18):
In Reply to: Re: Re: Re: 12 volt 9N.......HELP! posted by Ray,IN on March 29, 2001 at 18:11:50:
I share Ray's view of 6v systems. They work fine and don't need any "more" care than a 12v system to opperate as they were designed to. If going to 12v "fixes" a problem... you're only delaying the real problem and what ever made your 6v system "not work" will fail all together sometime in the future. NOW - with all that said.... If your purpose for converting to 12v is for economy and improved performance at lower rpm... converting to 12v makes real sense. You can buy everything needed to upgrade a system from 6v to 12v for less that the cost of a new 6v regulator. You can usually pick up a 12v coil off something you have laying around (I have several) and a 12v battery and 12v lamps are not real expensive. The Delco 10SI is under $40 at most part stores and it bolts up to most mounts with little head scratching involved. Once completed, you have a trouble free charging system that offers superior voltage regulation and assured output at much lower rpm than your generator ever thought possible. It doesn't look right at a restoration show, but the workers in the field hardly ever notice.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Bad Vibes - by Curtis Von Fange. One of the strangest ways to communicate with our tractor is to ask it how it feels. "Ask it how it feels," you say? Yup, ask it how it feels. Now, as with the other articles in this series one has to be able to hear what 'ole blue' is trying to say in response. The nice thing about our old iron friends is that they are usually quite consistent in their response, rather unlike some people I know who might change what they say due to the weather or other mitigating circumstances. But since t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
