|
Tractor Talk Discussion Board |
Re: Valve stuck! - HELP
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jerry B on March 19, 2001 at 09:18:13 from (162.114.24.109):
In Reply to: Valve stuck! - HELP posted by Tom S. on March 19, 2001 at 07:13:15:
Stuck closed? hhhmmmm.....ain't never heard of that happening before. But I ain't heard of a lot of things either. Most often valves stick open because the spring is unable to overcome the resistance of friction in the valve guide. IF the valve is stuck open you need to spray some good qaulity penetrating oil around the vavle stem and let it set for a while. Later use a brass or aluminum rod to push down on the valve and reseat it. You should be able to do this through the spark plug hole. Be very careful if you elect to use a screw driver as it can ruin threads.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Grain Threshing in the Early 40's - by Pat Browning. The setting is rural Wisconsin, halfway between East Troy and Elkhorn, on Hodunk Road, our nation was at war, and I was 6, 7 and 8 years old. George was our "threshing neighbor." He was the one with the threshing machine, a JI Case on steel wheels, and he pulled it to our farm with a JI Case standard tractor also on steel. In those days, steel wheeled implements were common. The roads were general gravel, so the lugs cutting into them wasn't a problem. George would set up the thresher, s
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
