|
Tractor Talk Discussion Board |
Re: 430 John Deere
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gene Davis on March 12, 2001 at 19:09:32 from (216.163.100.149):
In Reply to: 430 John Deere posted by Vernon Holt on March 12, 2001 at 17:42:44:
Worked for J.D. dealer when this tractor came out very few people here bought the power steering option because it cost money! If it has power steering it should have a decal saying "power steering" which was usually placed at the bottom of the yellow part of the grill, just below the bottom of the screen. Probably the hard steering is caused by the 90wt. oil having leaked out of the steering sector and all the worm gear and sector is not lubricated! But if this is the case, be prepared for a tremendously floppy driving machine when you do get grease or oil in it. J.D originally used a SCL {sulpher chloride lead} type of 90wt. gear oil, but the closest thing to it now is 85w-140 e.p. gear oil I suspect. We sometimes had to use chassis grease to keep it lubed. This,when added to the natural drag of a wide front end, all of the dry {from lack of lube, spindles, and worn tie rod ends have caused many cases of the horrible shimmies on the tractor,especially when the farmer had the lightweight tubular-type front end. This was a weak point on a very good machine, the 430w{w means a wide front axle}. LGD
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Adding an Hour Meter - by Steven Gussey. This article tells how I added an electric hour meter to my 1942 Farmall H after rebuilding it. I wanted to keep an accurate maintenance schedule for my rebuilt engine and the implements I use with my tractor, but the H was never available with a tach
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|