Re: Trouble with drive for Hyd Pump for front loader

Posted by Jim WI on March 06, 2001 at 11:15:21 from (192.159.76.19):

In Reply to: Trouble with drive for Hyd Pump for front loader posted by Bill on March 06, 2001 at 03:37:13:

I'll assume you mean that the pump is mounted on the loader frame as described below since I can't see how you could mount it on an arm.

On my dad's 2N, the pump is mounted on a bracket in front of the tractor. The bracket is bolted to the frame of the loader. The frame is mounted to the front of the engine.

When you mount the pump, you need to make certain that the center of the pump's drive shaft is exactly in line with the center of the spline plate on the front of the engine's crank pulley. The shaft must be perpendicular to the crank pulley.

Any misalignment at all will cause wear on the splines. The worse the misalignment gets, the faster the splines will wear.

On my dad's 2N we wore out one splined driveshaft in a couple of months. We then fixed the alignment problem and the second splined driveshaft has lastes several years and is still going strong.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Trouble with drive for Hyd Pump for front loader Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]