Re: Splitting a Tractor - Any Tricks, Hints, Cautions, Suggestions, etc. ???

Posted by B Simon on February 11, 2001 at 08:27:28 from (207.40.95.235):

In Reply to: Splitting a Tractor - Any Tricks, Hints, Cautions, Suggestions, etc. ??? posted by Alberta Mike on February 10, 2001 at 15:17:21:

I have worked with Cockshutts for many years, and I have found that on these models (35, 40, 50) it is easier to take the flywheel pan off, unbolt the pressure plate from the flywheel, and pull the engine out. You will also have to remove the clutch rod from the pedal, allowing the throwout bearing to slide rear-ward. Installation is the reverse of this procedure. This eliminates the need for an aligning tool. Any more questions, please feel free to contact me.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Splitting a Tractor - Any Tricks, Hints, Cautions, Suggestions, etc. ??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]