Posted by jdemaris on November 18, 2009 at 05:55:38 from (72.171.0.141):
In Reply to: loader pumps posted by mie in mo on November 17, 2009 at 19:22:32:
If it's a front-mounted, crankshaft-driven pump, the "industry standard" is somewhere around a 13 GPM @ 2400 RPM pump for farm loaders, and 23 GPM @ 2400 RPM for industrial or HD loaders. Smaller pumps will work but the loaders will be very slow.
Keep in mind that the GPM rating means nothing unless expressed at a given RPM.
The only rating the means anything on its own is the cubic inch displacement per revolution.
Farm loaders usually have at least a 1.5 cubic inch pump. HD loaders at least a 2.4 cubic inch pump and loaders with backhoes 3 cubic inches at least.
My Ford 4000 loader has a 23 GPM. 2.6 c.i." My Deere 1010 loader has a 23 GPM. 2.6 c.i." My Deere 1020 loader has a 13 GPM. 1.4 c.i."(slow) My Deere 300 loader has a 24 GPM. 2.4 c.i." My IH 3414 loader has a 23 GPM. 2.6 c.i." MY Case 580CK loader has a 23 GPM. 2.6 c.i." My Oliver OC4 loader has a 23 GPM. 2.6 c.i." My IH B275 with loader has a 10 GPM (very slow). 1.4 c.i."
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
