Posted by BDT in Minnesota on September 08, 2009 at 05:46:17 from (64.235.82.159):
In Reply to: snow blower posted by herbert johnson on September 08, 2009 at 02:40:15:
Herbert, your 850 will handle a Vee shaped, pull through snow blower, a 72" width would work best.....
Forget the backup blowers with your tractor; live PTO is voted as a must.! and, don't ask me about a sore neck!
I worked as a mech and later parts manager at Bradley Motors in Erskine, Minnesota. Floyd Bradley started selling 9N Fords in 1939, and sold his share of new Fords. Over the years, many of these Fords were tested on new snowblowers, as
Next door was Erskine Manufacturing. .. Those fellows built both the Vee style and two stage backup snowblowers by the thousands. Not to mention their front mounted two stage blowers. ..Today they are building a fourth style; This blower is a two stage blower that mounts on the three point, but faces foreward, so you blow when driving forward..Yep, spendy but good machines..Google Erskine Attachments for their website...
I have to chuckle every time someone claims that you NEED a live PTO to blow snow with a Vee type drive-through snowblower. Live PTO is a clear advantage, but if the snow is too heavy, you just make a half cut or simply keep the blower partially raised the first time through..
An older model, the 722 would be a good match for an 850... 72" wide would be PLenty Big, and then add the wing for doing the road shoulders... These blowers can often be found for sale in the $300- $500 price range... Only two greaseable bearings and a PTO shaft to service.. These are tough machines...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
