Posted by patrick 2N MD on July 23, 2009 at 04:35:20 from (75.196.234.150):
In Reply to: New 8N spotted posted by TGIN on July 23, 2009 at 04:07:51:
TGIN said: (quoted from post at 04:07:51 07/23/09) They have one down at the local dealer . Half of em will get bought up , parked in a shed and covered with a blanket . The other half will go to the 5 a. farmer . Ya should have seen the yuppies climing on it down at the Fair . Other than the 3 pt hitch the 8N was nt much in it s day compared to IH,JD,MH,Case,etc. but it was made in the USA . If NH was gona copy an American Icon they should have let American workers do it !
I agree! I am about 200 lbs and the step flexes when I got on! I noticed that all the welds on the shinny rails and roll over bars were rusting and that the welds were not really that nice. Sad!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Pat Browning. The setting is rural Wisconsin, halfway between East Troy and Elkhorn, on Hodunk Road, our nation was at war, and I was 6, 7 and 8 years old. George was our "threshing neighbor." He was the one with the threshing machine, a JI Case on steel wheels, and he pulled it to our farm with a JI Case standard tractor also on steel. In those days, steel wheeled implements were common. The roads were general gravel, so the lugs cutting into them wasn't a problem. George would set up the thresher, s
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
