To be quite frank I believe that the assembly line is worth most of the wage that is earned, (note I said earned)
What I hate is the following. IE: My wives cousin works at a Ford Plant, he goofs off 1/2 the day by playing video games in a break area while getting paid.
The skilled trades guys are the worst, Punch in then leave for the day and go to the bar, or play pool, or go home and work....Then go back to work and punch out for a full days pay-----Disgusting and I know that this is true.---I dont know a real percentage of guys that do this, put I know that it is true. I have an uncle that did this for years, he is retired now.
There used to be a plant in Detroit called the Detroit forge plant----Gm ran the plant and the machine shop in this plant was very well known for making tractor parts, snowmobile parts and other non-work related items. ---also disgusting.
I have seen with my own eyes a Ford plant that had a machine shop---20,000 sq. feet----30 guys were supposed to be working but most---90% were either reading the paper or standing around bull$hitting.
The amount of work that a UAW technician performs in any given day is about 10% that of any other employee performing same task in a non-union facility. (I am talking skilled trades or semi-skilled functions)
Most of the UAW members try hard, do a good job and are honest but the 20% or so that get a paycheck for doing nothing has ruined the reputation of the UAW. Along with other BS.
THE UAW HAS HELPED TO DESTROY GM, X-SLER, AND FORD------AND THE EXECUTIVES ALLOWED IT TO HAPPEN.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
