Clutch overhaul?

Posted by hendrik on August 17, 2000 at 00:23:42 from (194.53.253.50):

The clutch disk of my Farmall Super A is well worn. Friction faces on flywheel and pressure plate look worn too, but healthy.
The 'clutch and brake shop' I talked to say they would not only put new linings on the disk but need the whole assembly: flywheel, disk, pressure plate, thrust bearing, etc. to do a good overhaul. They would measure wear, evenness of springs, etc etc.
Is it really worth it? Or is this a case of "if you are looking for trouble, you will always find it"? (I thought it was 'tractorman' who coined this phrase.)
Thank you for any advice. Regards, Hendrik

Follow Ups:

• Re: Clutch overhaul? hendrik 23:07:51 08/20/00 (0)
• Re: Clutch overhaul? B.C. 05:30:10 08/17/00 (0)
• Re: Clutch overhaul? norm 02:49:08 08/17/00 (0)
• Re: Clutch overhaul? Z-bar 01:11:34 08/17/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Clutch overhaul? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]