I bet the jack says Power Fist on it and not Shur-Lift. At least that's what my Princess Auto catalogues show. I have never seen a Shur-lift hyd. bottle jack and I've been in Princess auto a lot over the years. The reg. hydraulic cylinders are made by Shur Lift in Canada (Princess Auto div.) but the hydraulic jacks aren't. Princess Auto does sell good jacks though. The KYB they sell are made in Japan and will work in any position but are a lot more expensive. 12 ton Power Fist bottle jack is about $30, KYB is about $100. The 8 ton long stroke Power Fist is also about $100. You were using a cheap Chinese jack. Eye protection won't help much when something is coming flying out under more than 8 tons of force. Sometimes hearing protection is bad because you can't hear when something is about to let go under over 8 tons of force. Unless your behind a wall, something could fly at you. Working safe? Why were you using a long stroke jack and you must have had to pump that jack pretty hard to go over capacity and to do that you'd have to be right beside it. You were very lucky. If someone else had posted the same incident you'd be all over it like bees to honey. A lot of people have saved thousands using older equipment. The new stuff breaks down too. At least with older equipment you have a chance of fixing it yourself. My 65 MF135 runs like new. I don't think a new tractor will still be going strong over 40 years later. Dave
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Revival of a John Deere Combine - by The Red, John Fritz. For several years I had been driving by a farm house on the west side of Indianapolis that had a John Deere combine parked in high weeds in a lot behind the house. The gentleman no longer farmed because the entire area was developed with housing and light industry. I had stopped several times and knocked on the door but no one would answer. My curiosity was up and I wanted to contact the owner. I wanted to see what he planned to do with the combine.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
