Re: 1000 RPM PTO

Posted by Dan from PA on August 02, 2000 at 15:41:11 from (141.151.152.52):

In Reply to: 1000 RPM PTO posted by Rick on August 02, 2000 at 06:06:46:

1000 RPM is more efficient on high-power, high-speed implements such as hammer mills and forage harvesters. For instance, the mill cylinder in my grinder/mixer turns at about 8000 RPM. More power will be lost gearing the 2800 RPM of the engine down to 540 RPM and then back up to 8000 RPM, than gearing down to 1000 and then back up.

Follow Ups:

• Re: Re: 1000 RPM PTO Jiff 17:37:18 08/02/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 1000 RPM PTO Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]