Re: Re: Re: 12 volt conversion - DIODE needed ???

Posted by Jim WI on July 05, 2000 at 10:03:48 from (192.159.76.19):

In Reply to: Re: Re: 12 volt conversion - DIODE needed ??? posted by mike on July 03, 2000 at 07:31:35:

There's been two categories of problems reported on this board with one-wire alternators.

First, a couple of guys have had problems with their batteries discharging over time. This could have been the brand of one-wire they used.

Second, most people using the one-wire report that the alternator will not start up until the engine is goosed to full throttle once. This isn't really a big deal but since the standard version is easy enough to wire, most of us recommend that instead.

To each his own...

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: 12 volt conversion - DIODE needed ??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]