Posted by John in La on February 16, 2009 at 05:47:39 from (65.6.106.69):
While this is not a part for a tractor I would still like to hear your input.
I bought a used lower unit (with guarantee) for a older outboard motor.
The unit was sent promptly but the first time I took it out for a test run the drive shaft broke after running it for about a hour. Broke so hard because it was at full speed at the time it cracked the lower unit case.
I called the guy and he said send it back for a replacement so I did.
He sent a second unit that looked a lot newer but when I took it out for a test run I found that forward was reverse and reverse was forward.
Sent this one back also.
Now the guy has said he has had problems finding the right unit. I even sent him my old unit so he could make sure he got the correct part this time.
Now I get a email from the guy and he says he has found the correct case. He says the lower fin is broken off so he will have to send it out to be welded and then we should be good to go.
I do not know how good I feel accepting a lower unit that has been welded on. The unit may be good if welded but I keep thinking about the abuse this unit must have gone threw to get this way.
So am I wrong to insist he find a different unit or send my money back or should I just accept the unit he has ?????????
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - by Teri Burkholder. The View from the Garage - Never a doubt, everything on our farm is a learning experience. I've been working very hard to get our two rundown Farmall A's sanded, primed , bondo�d, fiberglassed and painted before our big local tractor show called the Tulip Festival. My husband Ben came in the garage one rainy day to see if he could "help". Well if you knew Ben you wouldn't want him anywhere near your spray gun, fiberglass or bondo! So I pulled out the 2 old yucky looking magne
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
