MF65 hydrolic problem

Posted by Kathy on June 10, 2000 at 09:28:56 from (63.81.204.2):

Our hydrolics are not working for the three point hitch. It seemed to be intermitent lifting then no lifting. After pulling out the hydrolic pump and auxiliary pump (I think), it may just be the seals and o-rings need replacing because this auxiliary pump (under pressure) extrudes oil aound the seal areas and not through the tubes like it is meant to. Is this the case or have I not explained it properly? - poor instructions in manual. If the seals are a problem where can we get them from??? There is a semi-circular "o"-ring that is damaged. Please can anyone help?

Follow Ups:

• Re: MF65 hydrolic problem Billy 22:13:26 06/15/00 (0)
• Re: MF65 hydrolic problem ltf innc 13:29:49 06/10/00 (0)

Post A Followup Name: E-Mail: Subject: Re: MF65 hydrolic problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]