Posted by Billy NY on January 17, 2009 at 13:16:34 from (74.67.3.238):
In Reply to: Re: True story posted by Sean Feeney on January 17, 2009 at 11:29:58:
No, G.E. in their infinite wisdom, broke up the Ft Edward Dam in the 70's, the PCB's were contained until that event, now they can be traced around the world according to someone I know in the Wadsworth Lab in Albany NY. They have been held accountable and liable for this environmental disaster and will commence dredging a huge length of the river bottom this year, a monumental task, to recover the PCB's in the layers of sediment. The PCB's are encapsulated at this stage, some argued to leave it as is. I don't understand the methodology or the effectiveness of what this remedial work will have, but can tell you the Town of Waterford, about 5-6 miles from here, still draws their drinking water for purification from the river, until that is resolved, hard to say when it will actually start. G.E. has done some great things, but is also a colossal polluter of our environment, this is one of their greatest accomplishments in this area. If you have ever fished the Hudson in a canoe, places where you can't get to with a boat, some great fishing, all ruined, back in the 60's, the turbidity and raw sewage in the river water was at an all time high, no tree hugger here either, industry and much of society used what was a great resource for toxic waste disposal, some of which will never go away, water is very clean now, but who knows what is in the sediment layers they will be disturbing.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.