|
Tractor Talk Discussion Board |
Is there a hyd valve for UP,HOLD,FLOAT, and DOWN?
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Greg Reuter on April 06, 2000 at 20:45:57 from (208.153.34.42):
Is there 4-way valve that would provide
UP, HOLD, FLOAT, and DOWN for my
add-on 3-point hitch? UP, HOLD, and FLOAT with a
single-acting cylinder is fine for most things,
but it would be nice to add DOWN pressure for
getting the 3-point bucket to dig into the
ground better. The Northern Hydraulics catalog
(www.northerntool.com) lists several
Prince valves. I am not able to determine
from the description if one of them will do
exacly what I want. Northern recommended
their 2010 model, but I don't think it will
provide the FLOAT I need for mowing etc.
It is a "standard 4-way control valve". Their 2032 valve is a "4-way with FLOAT".
Northern told me it won't give down pressure.
It seems like it should, else it wouldn't be
any better than a 3-way valve. Also, what are these "load checks" some of
the valves have. If they don't have load
checks, will the implement drop while the
handle is being moved from the UP to the HOLD
position?
Follow Ups:
- Re: Is there a hyd valve for UP,HOLD,FLOAT, and DOWN? Dan from PA 13:37:58 04/07/00
(2)
- Re: Is there a hyd valve for UP,HOLD,FLOAT, and DOWN? paul 22:58:19 04/06/00
(0)
- Re: Is there a hyd valve for UP,HOLD,FLOAT, and DOWN? ted 22:46:27 04/06/00
(0)
- Re: Is there a hyd valve for UP,HOLD,FLOAT, and DOWN? Bill B 21:08:55 04/06/00
(1)
Home
| Forums
| Order Support
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
