Re: Loading A Tractor Without A Winch

Posted by Rob Ratch on August 24, 2008 at 21:34:49 from (71.167.19.42):

In Reply to: Loading A Tractor Without A Winch posted by Big Hunter on August 23, 2008 at 07:40:05:

in-too-deep said: (quoted from post at 15:40:05 08/23/08) Any clever ways to load a dead tractor on a gooseneck trailer without a winch?

I just loaded a dead Case 480CK with a come-along, and bumping the starter in gear when we got to the rear wheels on the trailer edge. We were going to jack-knife the truck and use another truck to pull the machine up, but as a last resort. Once it was loaded, I did use another truck alongside it to adjust and center it.

I loaded an 8n yesterday with a $50 Walmart Master winch and a come-along, and that went surprisingly smooth, aside from bending a rail on my trailer...

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]