Posted by J Heitkemper on August 05, 2008 at 09:43:31 from (98.108.122.188):
In Reply to: O/T House Siding posted by Bill in IL on August 05, 2008 at 07:22:42:
This is My Trade ,SO, This is my Take ,, If you ,or your wife are prone to change things often , build on, or perhaps sellout and move to another home ?,, GO WITH VINYL , You cant beat the cost and reliability and cleanability of Vinyl, plus the cheap versatility of changing the whole exterior of a home every 10 yrs if You desire at a reasonable cost .. AND IT WILL WATERPROOF AND LAST AS LONG OR LONGER THAN FIBER CEMENT.. No reason Vinyl siding would not last a 100 years! flip side , cement brd is tough , However the ENGinneers did a lousey job of waterproofing , CAULK EVERYWHERE And a 2 inch stay away boundary from everthing making a beautiful trimmed out house look choppy and irregular , Everyone knows within 10 years that CAULKING has had it , YUCK ,I HATE caulk , And Most of MY CUSTOMERS DISPISE THE LOOKS OF IT ALSO ,,./ If you have a simple no trim cracker box home the cement bd could work with minor headaches ,, We USE POWER AIR on all Cement bd Jobs ,, WE Sell Them Both with The Same Strait Forward honest Approach , Best Regards Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Pat Browning. The setting is rural Wisconsin, halfway between East Troy and Elkhorn, on Hodunk Road, our nation was at war, and I was 6, 7 and 8 years old. George was our "threshing neighbor." He was the one with the threshing machine, a JI Case on steel wheels, and he pulled it to our farm with a JI Case standard tractor also on steel. In those days, steel wheeled implements were common. The roads were general gravel, so the lugs cutting into them wasn't a problem. George would set up the thresher, s
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
