Posted by Hugh MacKay on July 13, 2008 at 02:42:59 from (216.208.58.126):
In Reply to: 65-70 HP tractor posted by lmccoy on July 12, 2008 at 20:39:26:
lmccoy: I can't understand all this concern for hills, round baler and bale don't weigh more than 5,000Lbs. and any 50 hp tractor with enough ballast will handle that on the steepest hills.
There are some round balers that seem to require a lot of hp. Best to avoid those as they are just an expensive way to make hay. Back in 1976 I bought a new IH 5x6 baler, and I found 560 or 656 were actually faster than 1066.
My advice, stay with your color of chioce get 65 PTO hp, not engine hp. Go for IPTO, two valve dual hydraulics, power steering and definitely 3 point hitch.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Removin Broken Bolts - by Staff. Another great discussion from the Tool Talk Discussion Forum. The discussion started out with the following post: " How would I remove a bolt thats broken off in a piece of metal and I want to save the treads in the metal and then put in a new bolt. "
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
