Posted by Earl -IL on June 30, 2008 at 17:35:21 from (71.171.244.155):
In Reply to: Bearings posted by Lanse on June 30, 2008 at 12:49:00:
Lanse, Is this the B-C Allis ? If it is # 1 crank is reground to correct undersize.#2 Correct undersize bearings . # 3 you will need a new .009 shim pack to start with.That is a lamenated (3ea. .002)(1ea. .003)pack .009 on each side of rod. Torque to 35-40 ft pds. Rod caps need to be on correctly. The same type of pack is need for the mains.If you can't find the shim pack. email me & will try & find them for you.I have done engine rebuilding for 40 plus years. We all had this problem when we started out. If you email me I will give you my ph. number & when you can call & I will walk you through this.I can call you if you if this would work. Just start by what I posted here. Earl
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Piston Ring Removal and Replacement - by Chris Pratt. Piston Ring Removal and Replacement - Replacing rings is a fairly easy process to stretch the engines usability between major rebuilds and cut down on that blue smoke and high oil consumption. Frequently, replacing only the rings is not advisable because by the time you do the teardown and measurement of the components, the pistons are often beyond the manufacturers specification or something else you find will signify the need for a major rebu
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
