Posted by john in la on June 08, 2008 at 18:24:03 from (67.35.255.59):
In Reply to: Re: Roundup alternative posted by garytomaszewski on June 08, 2008 at 18:08:50:
no consitrate
3 oz per gallon of water per 1000 sq ft.
So my 6250 sq ft should take 6.2 gallons of mixed product. Since it is tall and I am afraid of not getting total coverage I may increase to 12.5 gallons of mix per lot.
But that brings up another question.... Lable says 3 oz per gallon and 1000 sq ft. If I mix it at a rate of 3 oz per 2 gallons of water and still only cover 1000 sq ft am I doing just as good or should I mix per lable and put down double. My reasoning is I can know I am getting good coverage by seeing wet grass blades. I do not want to do a area half way and have to do it again.
1 of the lots has weeds and johnson grass about 4' tall so I may have to cut it first to get good coverage.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - More Memories of a Field Service Engineer - by Brian Dye. Introduction: The author worked for one of the largest Ford tractor dealerships in England as a trouble-shooter on tractor engines, hydraulics and combine harvesters from 1963 to 1972. In 1972 he became a dealer manager and finally left the dealer net in 1975 to run his own electronic design and manufacturing company. [Editor] We live right in the middle of Norfolk. The dealership that I worked for sold Fordson Tractors from the 1920's and some of t
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
