Posted by Texasmark on December 29, 2007 at 07:02:33 from (12.39.110.55):
In Reply to: 4020 smoke posted by Gary Halcom on December 28, 2007 at 15:45:08:
I had the Roosa Master pump go out once on a 4010. It didn"t do what yours is doing. It just got to where I couldn"t control it; would run at whatever rpm it wanted.
Puffs of smoke, if black, to me sounds of carbon buildup and carbon around the tips of the injectors occurs BTDT.
Additionally, the injector nozzles could be clogging either internally from the fuel, or externally from this carbon buildup. Once you screw up the fine mist spray pattern, you loose BTU"s, hence hp., and you get the black (unburned diesel) smoke.
I"d get something like "Sea Foam", obtainable in pt. cans at most any auto parts store for around $6 a can. It has oil, naptha, and alcohol in the mix and was initially designed to loosen up rings and clean up combustion chambers on outboard motors (for boats) in the colder climates where people liked to troll at low rpm"s and engines were getting all choked up.
I have tried regular diesel treatment and used Marvel Mystery Oil (also a solvent) for years, but even after doing that, when I did the Sea Foam thing things changed.
I use it in everything with an internal combuston engine around the place, everything, and have given all my tractors a "dose of castor oil". The results have been phenomenol. In most of my 40 year old tractors, it has completely cleaned up the exhaust. I recovered lawn mowers, weed eaters, chain saws and outboard motors.
If I were addressing a problem such as yours, I"d put about 3 cans in a tank of diesel (about $20 worth) and just give it time to do it"s thing. Go about your business normally for the most part.
However, it works best if you get it in the engine, give the engine a work out and then let it sit and back and forth. Allowing the engine to sit between operations (like overnight), gives it time to soak into the carbon and loosen it. About every 10 minutes (give or take) of operation, set the throttle to governor limit rpm"s and let her roar. Don"t be surprised what comes out of the stack.
I buy it by the case of 12 and usually ask for and get a 10% discount.
Besides, this is good for your engine, whether or not it solves your problem, it"s easy to administer, and is cheap. Can"t beat a deal like that, and who knows it may work.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.