Posted by paul on November 30, 2007 at 22:18:07 from (66.44.132.218):
In Reply to: What is live PTO? posted by ChrPenn on November 30, 2007 at 11:57:55:
Baling hay or blowing snow, if you get to a heavy spot that wants to stall the tractor or overload the implement, you can push in the clutch 1/2 way, & let the thick bunch clear out because the tractor stops moving, but the implement pto continues to have power.
Or you can shift the tractor into a different gear (slower or faster) while the implement continues to have power to it.
Or for a big heavy load like a brush hog, you can push in the clutch and stop the tractor from moving, while the big heavy flywheel load (hog) takes a long time to spin down. Without live pto, the rear wheels will continue to move while the hog spins down, because they are locked together by the non-live pto.
With the hog (or a tiller or baler or snowblower) in heavy grass (etc), you can put the pto in gear, spin up the implement, and then start moving the tractor, instead of putting both in gear & the tractor needs to start spinning the implement & moving forward at the same time.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.