Posted by the tractor vet on November 28, 2007 at 07:27:14 from (76.212.225.148):
In Reply to: more info posted by jerry thomas on November 28, 2007 at 04:54:32:
If you are having a problem with the cam and can not find a new one from Case I H and no GOOD used ones to be found , Then here is some food for thought , Sometimes if ya can find a good machine shop they can weld up the cam and regrind itOr one can start callen Cam companys and they may be able to regrind it back to spec.'s . Also you will need to either have the lifters either reground or replaced with new or it will wipe out the cam in short order .Myself i have never worked on a 284 and do not clam to be the guru on that I H tractor . When i was working on tractors everyday When i did a total rebuild i had the cams either rebuilt or replaced if they were woren . Then i would start looking into WHY it went bad . To soft lobes . wrong oil used valve set not with in spec.'s to stiff springs ????
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Seeing an Old Friend - by Joe Evans. Dad had a concrete contracting business starting in 1960. One of his first pieces of equipment was a Ferguson TO-35 with a Davis loader. Dad replaced the TO-35 with a MF 202 Workbull, essentially an industrialized Ferguson 35 I am told. Dad bought the 202 new in 1962, and I recall quite clearly going to the dealer with him to sign for it.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
