Re: timing sickle bar mower ??

Posted by old on August 06, 2007 at 08:41:50 from (4.244.57.238):

In Reply to: Re: timing sickle bar mower ?? posted by BLW on August 06, 2007 at 08:26:39:

The section/knifes need to be centered on the ledger plates or think of it this way. When you look at them/it you see the points of the guards. Well the knife/section needs the tip/point centered in the guard when the stroke is both all the way in or out. OR in other word the line that is the gap in the sections where they meat will be center of teach pair of guards. Hope this is better then clear as mud maybe more like clear as beer.

• Hobby farm

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]