Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 
Marketplace
Classified Ads
Photo Ads
Tractor Parts
Salvage

Community
Discussion Forums
Project Journals
Your Stories
Events Calendar
Hauling Schedule

Galleries
Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Articles
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs
Glossary

Miscellaneous
Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

  
Tractor Talk Discussion Board

Re: How to fill Propane Tanks?


[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]

Posted by John A. on July 27, 2007 at 23:03:43 from (4.227.107.130):

In Reply to: How to fill Propane Tanks? posted by WesleyC on July 27, 2007 at 07:22:18:

Wesley, I have read all the comments and no one has answered your question, How to fill a tank? It does not matter if that tank is on a tractor, Pickup or the tank for your BBQ grill it is all the same!
You will need a "Nurse Tank" it can be the tank that you heat your home from or a free standing tank just holding the LP for later use just like you DSL Tank over by the barn where you fill your DSL Tractor.
Now, that tank will need a "wet line" that your filler hose will connect to, or you can use an "Unloading Valve" to put on top of the christmas tree valve on the nurse tank, the same spot where the LP truck hooks up to when that tank is being filled from the delivery truck.
hook up the hose to you wet line on the nurse (tank 1) then hook it up on the tank to be filled (tank 2). Open the valve on tank 2 then open the valve on tank 1. Now open the "bleeder valve on tank2" on big tanks like tractors or pickup tank it is the smaller version of the fill port on those tanks. On tanks for your BBQ it it is the screw driver head on the valve.
That valve when opened will drop the pressure in tank 2 so the LP in tank 1 will flow to it. When tank 2 is full close the bleeder valve on tank 2, then close the main valves on tank 1 and Nurse tank remove the hose and off you go that is a short version of what you are asking.
Now if you buy an LP tractor, you will need a fast fill for when you run out of LP away from home. Scrounge up an old style BBQ tank it can be filled yourself, to use as a quick fill to get home to your big nurse tank. just hook up the old BBQ tank and a short length of hose to a bleeder then screw on the bleeder valve, turn BBQ tank upside down, when you don't feel the LP going through the hose. Close the valve on the BBQ tank, unscrew the Bleeder and there you are 5 gal of LP in you tank now you can now get home. Hope this helps!
Later,
John A.
PS I have personally pissed off more LP by reliveing pressure off my hose than most will ever use. that was When LP was $.35 cents/gal
4 pickups on LP over 150000k miles on each and countless tractors.
just think through what you are doing, do not leave any open valves where LP can get away from you. There will always be a little that escapes between the valves at tank 2 when you take the fill hose off that is normal, but a hudge rush of LP will indicate you have left something open. Again Just be careful, ask questions, do not get in a storm.
John A.


Replies:




Add a Reply

:
:
: :

:

:

:

: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Ford Part Number Trivia - by Forum Participants. "Replaced by" means the part was superseded. All of my part books date back to 1964 and New Holland have changed some part numbers. They usually put the old Ford part number on the package. I was suppressed when I looked up the part number of the auxiliary drive shaft because for some reason the part number went through a radical change and it lost its "Basic Part Number". Ford part numbers follow the following rules. Most part numbers are in three parts. The middle part is called the ... [Read Article]

Latest Ad: Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request [More Ads]

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy