|
Tractor Talk Discussion Board |
Re: O. T. Engine oil for 3.6 Ford V-6
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by 02XLT4X4 on July 24, 2007 at 06:57:59 from (69.63.98.126):
In Reply to: Re: O. T. Engine oil for 3.6 Ford V-6 posted by dhermesc on July 24, 2007 at 05:39:43:
A 4.6 Escape would be a pretty spunky little rig. I think a 3.6 would sound alot more realistic for that kind of vehicle. I run 5W-20 in my F-150 with a 5.4, runs great. When they actually measure it 5w-20 is only a couple points different than 5W-30, not enough to really worry about. Motorcraft stuff is of pretty high quality and is pretty cheap. A Motorcraft FL-820S filter for my 5.4 is less than $3.50 and Motorcraft Synthetic Blend oil is $.20 more per quart than the rebottled Valvoline dino oil I had been getting at Napa. All of this is available at about any Wally World, so you don't have to pay whatever the dealer will try to stick you for it either.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Fasteners: The Nuts and Bolts of Nuts and Bolts - by Curtis Von Fange. The nuts and bolts of nuts and bolts is an interesting and essential piece of knowledge that applies to our older tractors. An improperly torqued capscrew on an engine head or a shear bolt that is too hard on the driving shaft of a bushog can create havoc and make an expensive and uncalled for repair. Let�s examine the purpose and design of these fasteners in order to ensure their proper use. Fasteners are probably one of the aspects of mechanics that is given the least amount of thought.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|