Posted by Ray on March 06, 1998 at 11:16:13:
In Reply to: Ford Jubilee Hydraulics posted by Linz Lord on March 05, 1998 at 09:26:50:
: My Jubilee will not lift at idle speed. At high
: rpm it lifts a box blade with no problem although
: it takes a long time before it begins to lift. I have
: rebuilt the piston pump. I have put new seals
: and o rings on the piston. I have disassembled
: the lift cylinder assembly and checked all valves
: for free movement. The oil is not turbulent when
: viewed through the access hole. Any suggestions?
=======
Although it has been a while since I had the hyd lid off a NAA, I seem to remember a couple of check & safety valves that should be checked.
===========