Re: Update on International truck brakes

Posted by Dave Sherburne NY on April 27, 2007 at 08:30:04 from (170.215.197.82):

In Reply to: Update on International truck brakes posted by Richard G. on April 27, 2007 at 05:29:49:

I had one of these trucks once, The only way to bleed it was to pressure bleed it. I took a cheap
new hand weed sprayer, put a gallon of brake fluid
in it built a flat piece of steel I could clamp to
the top of the master cylinder and attach the weed
sprayer to, Then pump it up and bleed each brake
It took a long time for all that air to reach the
back wheels

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]