Re: Welding Help??

Posted by Janicholson on April 17, 2007 at 18:28:49 from (66.173.50.60):

In Reply to: Welding Help?? posted by Allan In NE on April 17, 2007 at 17:05:02:

A fine rod with good strength and superior starting qualities is E-7014. Once started, the flux passes enough current to start the arc on touching. The rod burns into the flux and that allows the flux to actually touch the work while welding (controls arc length. This rod is very low spatter, superior in slag cleaning, and strong. If you twist the lead to the stinger, and lay the rod on a piece of plate, then turn on the welder, it will weld its own path till it runs out of rod. For non-alloy high value welds it is a must try, JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]