Re: Ferguson TO30 Starter Issue?

Posted by Irv ( Ia) on April 09, 2007 at 08:55:48 from (63.162.92.37):

In Reply to: Ferguson TO30 Starter Issue? posted by Fred Hardin on April 09, 2007 at 07:44:45:

I would agree with bigjt. Mine wouldn't turn over very good either on 6v. so I converted it to 12v as you did. First time I tried it on 12v I smoked the starter switch. I think that was going bad before and I didn't realize it. As for yours, it might be that or your starter brushes might be setting on a bad spot on the commutator or the brushes are getting too short and just barely reach. It will sometimes start the tractor with help, but it keeps getting worse. It might be worth a look.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]