Re: Anyone familiar with NH 717 chopper?

Posted by Cliff Neubauer on April 03, 2007 at 10:25:35 from (69.66.91.175):

In Reply to: Anyone familiar with NH 717 chopper? posted by BLinWMi on April 02, 2007 at 21:30:33:

We ran a 718 for over 30 years starting out on an IH 856 turbo and later on a 1086. We had lots of extra power but I don't know how much good it did because that machine could only handle so much crop at a time. We finally parked the 718 after one of the bolts holding the shear bar broke which let it get into the knives and made a big mess.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]