Re: 330 Utility Int

Posted by vally farm on March 09, 2007 at 19:40:58 from (207.69.138.136):

In Reply to: 330 Utility Int posted by Big un on March 09, 2007 at 17:23:55:

If I rember corectly, they tend to have a tranny seal problem. Either the PTO or the main input seal if I rember. If they start to leak it is very hard to get them to stop..something wobbles just a hair and works on the seal. That being said, I have an Uncle who has had one for years with zero problems. He runs a 200 head dairy and a feed mill operation, plus does trucking in his free time. Uses it for almost every small chore there is. It does have the 300/350 tractor with the 340 engine. Something about firring the two together didn"t lone up just right causing the leak. Again, the leaking problem has only been related to me, although by several people, but the only one I know of runs and works great. Mike

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]