|
Tractor Talk Discussion Board |
Re: Loaded tires
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Don-Wi on February 18, 2007 at 15:55:50 from (205.213.173.5):
In Reply to: Re: Loaded tires posted by Hugh MacKay on February 18, 2007 at 13:31:18:
I can understand using the old tube on a set of duals, but I would atleast put in a new stem!!! Our tire shop strongly recommends a new tube in a new tire, and I don't think they'll even give you the option of using the old one if it's had fluid in it. I had the fluid pumped out of my 1600 while I was working on it, and it was a good thing too because one tire blew out just sitting next ot the shop. Now I've got new tires on the rear and just put them on dry because we use it to pull the planters and run the blower. No need for the weight there... and it still weighs in at about 7200. Our 1855 on the other hand has loaded 18.4-38's plus a bunch up front and overall it weighs in at 13,300. That's the plowing tractor and it's hopefully gonna be getting a new set of rubber in a year or 2, then the old ones are going on the dual rims for the extra traction... All the complaints of CC in the rears astounds me, because it's something that can be avoided so easily just by simple maintnance. If it's leaking you're gonna know one way or the other. Donovan from Wisconsin
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|