Re: WD-45 Loader Operation

Posted by omahagreg on February 16, 2007 at 18:11:56 from (68.13.134.45):

In Reply to: WD-45 Loader Operation posted by Rick Fanning on February 16, 2007 at 07:54:12:

If you don't want to take off the loader, or install valves in the system, you can do what we did. I found out what height I wanted to drive with the loader up (about even with the hood) and then measured the amount of cylinder exposed. Went to a metal fabricator, and found some 'u' channel large enough to go over the cylinders. You can see one in the picture. You raise the bucket, install the u channels (use a hose clamp to secure), lower until it stops. Then you can unhook the hose, and you have complete, independant control of what you have in back.
Greg

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]