Re: Need help With engine issue

Posted by Ed Hentz on February 13, 2007 at 17:33:51 from (69.244.35.167):

In Reply to: Need help With engine issue posted by Ed Hentz on February 11, 2007 at 21:56:25:

I would like to thank all of you for the information. It looks like we will punch all three cylinders and sleeve them since the pistons are standard size. We will be replacing the piston in the cylinder with the chip in it. the chip appears to have been cause when the cam broke into three pieces and drop a chunk onto the rod and piston skirt area breaking the skirt and twisting the rod. It also spun the bearing on the crank. The other bearing surfaces are all ok and close to original size, so we will clean up the damaged area and make the others match it 's dimensions.Hopefully keeping everything to readily available parts. Again Thak you

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]