|
Tractor Talk Discussion Board |
Re: Synthetic Oil Change Interval
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by RMinVa. on February 10, 2007 at 16:35:48 from (209.145.80.174):
In Reply to: Synthetic Oil Change Interval posted by Short Round on February 10, 2007 at 15:29:36:
Amsoil. Change once per year and change filter at 6 months and fill what's needed for filter replacement. Been doing this since 1989. Oldest is a 90 caravan. Bought used in 92. Had 56,000 when I bought it. One oil change per year since and now has 232,554 last time I looked. It's driven daily now. My wife uses it for her ride to work. Have two pickups 98/99. Both bought new. Both have over 120,000 and get the same treatment. Also use it in both diesel tractors. That van has had several change done at 16,000+ miles. Got a good friend in Kentucky that has a Dodge truck with a Gertag transmission that was eating shifter forks. He was replacing them about every 18 months or so. I think it's a 91 model. I called the Amsoil Tech and asked what to use in it. It had 10w-30 engine oil in it. I figured Amsoil would have some type of gear oil for that application. The tech told me to use 10W-30 in it. I shipped him some and it's been going over 4 years now and no more shifter forks have gone bad. He's been happy with it too. Solved a big problem for that transmission. He sells horse hay and is on the road selling about 30,000 bales per year. He was about ready to sell that old truck because of the shifter problem.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|