|
Tractor Talk Discussion Board |
Questions on a 3 bottom Plow
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Charlie T in VA on January 16, 2007 at 10:30:31 from (71.253.148.82):
I have a friend who was given a very large (heavy) 3PH 3x16 or 3x18 Class 2 made by "Long" (this plow had a square plate at the back so you could bolt on extra plows to make it a 4 or 5 bottom). The plow was to much for his tractor so he decided to take it to the local tractor & equipment dealer to trade it for a smaller (lighter) class 1 3PH 3x16 or 3x14 3ph plow. The salesman told us that the plow was only worth about $100.00. I didn't understand why. It was nice, clean and straight, just to big and heavy for the tractor. The salesman tried to tell us that Long was junk and the plow was not worth the $100. Why would the Long Plow only be worth $100???? It didn't rally matter he got it for free, but it was bigger and cleaner than anything the saleman had on this lot, other than the repainted ones. Has any one ever heard good or bad things on a Long plow. We ended up getting a MF plow, it seems to work great and the tractor handles the new plow very well. Thanks
Charlie
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
