Re: Rust Convertor

Posted by big hunter on January 15, 2007 at 07:54:08 from (208.242.126.165):

In Reply to: Rust Convertor posted by Double R on January 15, 2007 at 05:31:37:

don't know what kind of converter I used but I removed a fifth wheel from a mack frame, rust all under where it was bolted, pitted pretty bad, I wire brushed it, brushed the converter stuff on kinda heavy (it was a black frame sitting in the sun in the summer baking...it was HOT) painted some black rustoluem over that ....been there for 12 years and to top it off I plow snow for the county here in maryland and we use salt all the time...the converter did a good job

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]