Re: Question for Allan on 66 series

Posted by old fashioned farmer on January 14, 2007 at 19:12:20 from (4.225.93.239):

In Reply to: Re: Question for Allan on 66 series posted by trw on January 14, 2007 at 17:52:35:

Howdy,

It should be alright as long as you've got the majority of that good stuff off. I just prefer to have it as clean as I can. To me that's a personal preference. I do run through several wire brush wheels this way though. It also adds time to the project. The main thing is to get a smooth surface. If you cut off a good bit of the external grime, grease, and surface rust but leave paint on it so that you can see edges of where the old paint ends and bare cast begins, I'm talking a well-defined edge, then I'd go further. If it's a well blended look then you're alright. If you leave that defined edge you'll see it under your final coat even and it will kill the whole thing. God bless.

--old fashioned farmer

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]