Re: Installing cylinder sleeves

Posted by jdemaris on January 09, 2007 at 15:57:40 from (66.218.17.105):

In Reply to: Installing cylinder sleeves posted by 37 chief on January 09, 2007 at 14:18:21:

Anything slippery will work fine as long as there is no petroleum in it. There's no special concoction needed. Just make sure the sleeves fall into place with little effort when the o-rings are NOT in. Then - when pushing in the sleeves for final assembly - you know what you feel is the o-ring resistance and nothing else.
The issue with Deere is the orange o-rings. They are designed to swell up as soon as they make contact with oil. So, obviously, if you use any oil - you could be in for a mess.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]