Re: No spark

Posted by old on January 08, 2007 at 12:31:46 from (4.244.57.48):

In Reply to: No spark posted by Sparkless on January 08, 2007 at 11:59:40:

Loosening up that nut is easy if you have an impact, but if you don''t you can still use a poor mans impact which I'm sure you have. By the way your problem is probably bad/dirty points. The poor mans impact is a hammer and a wrench or socket. Put the wrench/socket on the nut, hold the flywheel with your hand then hit the wrench/socket wrench with the hammer. It may take 10 plus hits but it should come loose doing it that way. I've done that probably a few 100 times over the years before I got my compressor and impact gun

• Hobby farm

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]