3 point arm adjust on 175

Posted by keith in Kelseyville on January 07, 2007 at 21:42:01 from (24.6.125.222):

Hi All,

I've got a MF 175. I'm drilling some holes with a post hole digger and need to adjust the angle of the auger by changing the length of the adjustable 3 point arm. Now this is normally a no brainer, grab the adjust spinner and start cranking...well not so fast. It won't turn. This is the first time I've used it since I bought the 175. Seems like there is a lock on it somewhere. It rocks back and forth about 1/16th turn, but hits a hard stop both ways. I can't see any pin or anything stopping it. Is there something I just don't see...what's the trick?

Thanks for all the help,
Keith

Replies:

• Re: 3 point arm adjust on 175 BigMarv1085 in Ga. 00:33:17 01/08/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]