|
Tractor Talk Discussion Board |
Re: Anyone use wood gasification fueled tractors
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on December 20, 2006 at 16:46:33 from (216.208.58.154):
In Reply to: Anyone use wood gasification fueled tractors posted by msb on December 19, 2006 at 14:04:17:
MSB: I have photos here of a system that was built in the Annapolis Valley of Nova Scotia in the late 1970s. This gasifier was designed to burn whole round bales of straw. The tower the bales were placed in was round and large enough in diameter to take the bales, and high enough for three bales at one time. The fire was a controlled burn in the bottom of the chamber, and the gasses coming off were used to fuel a propane grain dryer and other propane heating devices on the farm. This was a continuous burn chamber, whereby one kept adding bales at the top. It had to be shut down weekly for cleaning, usually a wheelbarrow load. This system has since been dismantled as the designer and operator has since passed away. One of the problems they encountered was control of the fire. I talked just last year with the designer's son and he feels some of the new computer controls now out could have solved their problems. They almost had melt down a couple of times. The system also worked much better in the fall when round bales had not yet lost the round shape. Once bales had been stacked and no longer having a good round shape, it caused bridging problems as well as up draft problems. We concluded that just maybe some of the more dense bales of today may work better. There is a company in Nova Scotia, currently manufacturing and marketing a similar upright burner for round bales. I don't believe he is designing this as a gasifier but rather a heat source for hot water furnace. I have researched this quite a bit, basically interested in fuel for stationary applications. I've come to the conclusion that pelleting the fuel supply will be far more efficient than trying to burn whole round bales.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Identifying Your Tractor - by Staff. Maybe you bought it from a friend who didn't know what kind of tractor it was, or perhaps (and this is every tractor fanatics dream) you stumbled across it in an abandoned field covered with weeds but intact. In any case, you have no idea what the make and/or model is. For awhile perhaps it doesn't really matter. Especially if it runs! But pretty soon you'll probably need to tinker with it a bit and maybe buy a part or too. Having a manual is nice. But how does one go about dete
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|