Re: 706 D PTO Pack

Posted by LBSMJS on December 19, 2006 at 20:32:35 from (67.55.148.10):

In Reply to: 706 D PTO Pack posted by Big un on December 19, 2006 at 16:24:07:

If you end up taking the control spool out you might want to change it to a 66 style valve.The 06 & 56 series used a self locking style stem that wore out after many years of use.Then they had you drill a hole & put a allen screw in,but now when you set the pressure the screw could be right on the edge of the indentation from the last time the pressure was set.After using for awhile it will move & then it,s loose & you will have low pressure again.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]