|
Tractor Talk Discussion Board |
Cheap power upgrade for diesel tractor ?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Chris Young on December 01, 2006 at 09:01:50 from (69.21.9.42):
When I worked as a mechanic at a Dodge dealership the 94 12 valve Cummings diesels came out with a new injection pump and there was a problem with them smoking and missing at higher rpm with elevations above 5000 feet and the fix was to advance the timing on the injection pumps 2 degrees and what a difference it made!!!! A lot more power and fuel mileage went way up. So I've been thinking that some of these diesel tractors might be able to do the same thing. So bumping up the timing 1 or 2 degrees would not hurt to see what happens! I plan on doing this to my 930CK and doing 2 degrees only to start with. Maybe more is possible with out causing problems. Has anybody tried this? I think this method is a lot cheaper then making the adjustment of running more fuel through the injection pump. I know that more fuel running into the combustion chamber can make your diesel run hotter and smoke more and that smoke is nothing more then unburned fuel. Or how about doing both, more fuel and advancing the timing? Something to think about. Chris Hotchkiss, CO
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
1938 John Deere LI
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|