|
Tractor Talk Discussion Board |
Re: WHAT will we do - a long read
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by williamf on November 15, 2006 at 05:14:46 from (66.82.9.53):
In Reply to: WHAT will we do posted by No tools on November 15, 2006 at 03:51:47:
It'll rain this evening here, too. So this morning I'll go down in the swamp to finish the little bit of road work I was on Monday when the hydraulic line sprung a leak. Which covers what I did yesterday. And Monday. It's the second time I've replaced that hose, and the one next to it that goes to the other end of the same cylinder twice also. After I replaced the other the second time I admitted that I understood some things better than the designers and didn't put it back in the clamp. Engineers hate to see a hydraulic hose move along its length but sometimes that's better than having it crimp and twist where it's held tight. If I had gone back and liberated this one at the same time I would have had to find something else to keep myself busy today. It's a serious chore to replace one of these; this one required taking the seat off and taking loose six other hoses to get to the end up under the platform. All of them hard to reach. Put the wrench on, turn the tiniest fraction, take the wrench out, move around to the other side of the tractor, climb up and twist around to reach, insert the wrench though another hole, turn another tiny fraction, climb back down, go back to the first hole and insert a different wrench, another miniscule movement.... The only thing that kept me going was knowing I had done it before so it had to be possible. I was younger then, though. It took eight hours actual work time and two trips to town. The bright spots: I replaced the ends on two of the really difficult hoses - they were male ends that required turning the whole hose to unscrew them. With to 90* turns in the hose that's a job for three hands. Also, by chance I wore a t-shirt from the mill where I work to the hydraulic service place. Turns out the counter guy did a lot of business with the maintenence folks in my department, we knew a lot of the same people, when he wrote up my bill he gave me the same discount IP gets. Bill was half what I expected. It's who you know. Better day today and much needed rain tonight. Wm
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
A Question for Dads This recent topic from the Tractor Talk discussion board is being highlighted because it is an awesome display of the caliber of individuals that have made this site their own. The young person asking questions received positive feedback and advice from total strangers who "told it like it is" with the care many reserve for their own kids. The advice is timeless... so although it isn't necessarily antique tractor related, it will be prominently displayed in our archives to honor those who have the courage to ask and those who have the courage to respond in an honest, positive manner.
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|